DC Gasoline Pump
GENERAL DESCRIPTION These products are positive displacement. Rotary vane pumps. Depending on installation and viscosity, these pumps can deliver up to 15GPM or 57LPM. Their rugged design makes for a long life of dependability.
Yoilp 1228-4 12V/24V
• Max. Capacity: 15GPM
• Rated Power: 1/4HP
• Max. Lift: 20Feet
• Hazard class: 1
• Area Classification: Division 1
• Gas Group: D
• Temperature class: T4
- 技术参数
- 详细描述
-
- Commodity name: DC Gasoline Pump
- Commodity ID: F-A009
- 产品型号: Yoilp 1228-4 12V/24V
GENERAL DESCRIPTION These products are positive displacement. Rotary vane pumps. Depending on installation and viscosity, these pumps can deliver up to 15GPM or 57LPM. Their rugged design makes for a long life of dependability.
Features:
1. Electrical wiring should be done a licensed electrician in compliance with local codes. Rigid conduit should be used and proper groundmust be provided to avoid the possibility of electrical shock. Failure to comply with warning could result in serious injury and /or loss of
property. Use only Static wire, conductive hose when pumping flammable fluids.
2. For DC pump extreme operating condition with working cycles longer than 30 minutes can cause the motor temperature to rise, thus damaging the motor itself. Each 30-minute working cycle should always be followed by a 30-minute power-off cooling phase.
3. MAXIMUM BY-PASSING TIME: 3 MINUTES
4. DO NOT RUNN DRY OVER 30 SECONDS -
• Max. Capacity: 15GPM
• Rated Power: 1/4HP
• Max. Lift: 20Feet
• Hazard class: 1
• Area Classification: Division 1
• Gas Group: D
• Temperature class: T4
Features:
1. Electrical wiring should be done a licensed electrician in compliance with local codes. Rigid conduit should be used and proper groundmust be provided to avoid the possibility of electrical shock. Failure to comply with warning could result in serious injury and /or loss of
property. Use only Static wire, conductive hose when pumping flammable fluids.
2. For DC pump extreme operating condition with working cycles longer than 30 minutes can cause the motor temperature to rise, thus damaging the motor itself. Each 30-minute working cycle should always be followed by a 30-minute power-off cooling phase.
3. MAXIMUM BY-PASSING TIME: 3 MINUTES
4. DO NOT RUNN DRY OVER 30 SECONDS
Keywords:
RELEVANT
Get in touch
Get the most detailed information and recommendation from our experts within 24 hours.
REVIEWS
